SG-10 Swan Neck Corner Light, Opal
Standard, Indoor-Outdoor
First introduced in the 1960s, the SG-10 Swan Neck Corner Light carries the familiar cast-aluminium body and teardrop glass neatly around the corner. Its three-point bracket keeps the installation compact, while opal glass creates a softer, low-glare glow for passageways and eye-level locations.
Available from
£197
Specified here with opal glass, this variant can also be paired with clear glass elsewhere in the family. It is available in five standard finishes, with any custom RAL colour available to order. The porcelain lamp holder can be supplied for Bayonet Cap or Edison Screw lamps, subject to final production specification.
Width
200mm
Length
340mm
Depth
379mm
Weight
1660g
Still a bright idea
Introduced in the 1960s, the SG-10 is the sort of straightforward design that never needed reinventing. A little refinement, certainly. Reinvention? Not so much.
Screw it to renew it.
The solid pressed-and-blown glass diffuser screws directly into the cast casing, so it can be loosened and removed one-handed for quick access to the lamp. That is especially useful when the fitting is mounted high up, above a doorway or in another awkward-to-reach position. No clips to juggle, no loose parts to hold onto. Unscrew, change, replace.
Corners, considered
Corner mounting makes light of awkward architecture. The SG-10 is particularly useful on side elevations, building corners and walkways where one fitting can serve more than one approach. With opal glass, the softer output works especially well on circulation routes and closer-view locations where glare from multiple directions would be unwelcome.
Softly does it
The opal diffuser conceals the lamp and turns the whole lower section into a softly illuminated form. Its even glow is particularly effective on corners and circulation routes, where the fitting may be seen from several directions and a gentler source helps avoid glare while still defining the route or architectural edge.
Finished to your fancy
The SG-10 is available in J&G Coughtrie’s five core finishes: White, Black, Industrial Aluminium, Antique Bronze and Gloss Grey. For projects calling for something more particular, it can also be specified in any custom RAL colour, priced separately. The opal glass produces a softer, more even light suited to quiet corners, passageways, eye-level installations and spaces where subtle guidance is more useful than a visible lamp.
Tear it up, together
The SG collection brings together one of J&G Coughtrie’s most distinctive forms: the compact Teardrop diffuser. Choose the sweeping Swan Neck, or the more compact SG Harbour with its right-angle neck, reflector and protective cage. Available in wall and corner-mounted versions, with clear or opal glass, the family makes it easy to carry one consistent lighting language across a project.
The devil is in the details
The SG-10 earns its character through the details: a smooth cast body, a glass diffuser that screws straight into place and hardware designed to be understood at a glance. Nothing superfluous. Quite a lot to admire.
Width
200mm
Length
340mm
Depth
379mm
1
Cast with character
The solid aluminium casing is smoothly curved and reassuringly substantial, with the original J&G Coughtrie name proudly embossed into the casting.
Screw-in simplicity
The pressed-and-blown diffuser threads directly into the casing and can be removed one-handed, making lamp changes far easier when the fitting is mounted high or hard to reach.
J&G Coughtrie, embossed
Branding is cast into the body rather than added afterwards: a small piece of provenance built permanently into the fitting.
Three-Point Corner Bracket
A cast aluminium bracket fixes at three points to hold the fitting securely and neatly on the corner of a building or walkway.
Opal Teardrop Glass
The opaque diffuser softens the source into a calm, even glow, particularly useful on passageways, sheltered corners and other locations viewed close to eye level.
Porcelain at heart
A porcelain lamp holder provides a suitably robust home for either Bayonet Cap or Edison Screw lamps, subject to final specification.
Technical Information
If you have tech spec’s in mind, scroll through the marvellous information below, to locate all the detailed product information you might need to finalise your project details: Dimensions, weight, photometric data, materials and electrical characteristics are all included, and you are most welcome.
Product Information
Product Materials
Cast aluminium casing; formed aluminium tube swan neck; cast aluminium wall mounting / corner bracket; pressed and blown screw-glass diffuser; Polyethylene Foam gasket; steel fixings; porcelain lamp holder; powder-coated finish.
Product Dimensions
Overall dimensions: Width 200mm; Height 340mm; corner projection 379mm.
Product Weight
1.66kg
IP Rating
IP65: Suitable for inside or outside use in wet weather environments. Dust tight and protected against water projected from a nozzle.
Luminaire Characteristics
Bulb Type
Edison Screw (E27) / Bayonet Cap (B22)
Electrical Characteristics
Power
Depends on bulb used
Voltage
230V
Current
Depends on bulb used
80 Years of Sustainability
J&G Coughtrie has been following sustainable manufacturing and design practices for 80 years - because we believe that sustainable design is simply good design.
Peruse more products
Cast a wandering eye over our other lights. Bulkheads, Swan Necks, Pendants or Table Lamps, whatever takes your fancy...
Order
SG-10 Swan Neck Corner Light, Opal
Colour