FS-10 Swan Neck Corner Light, Clear
Standard, Indoor-Outdoor
With the Clear Corner FS-10, angular fitting meets angular corner - reintroducing J&G Coughtrie's original 1960s classic. The two-part casing pairs with a wedge shaped clear glass diffuser for a warm, corner glow.
Availability
Coming soon
Specified here with clear glass, this variant can also be paired with opal glass elsewhere in the family. It is available in five standard finishes, with any custom RAL colour available to order. The porcelain lamp holder can be supplied for Bayonet Cap or Edison Screw lamps, subject to final production specification.
Width
125mm
Length
340mm
Depth
384mm
Weight
1750g
A different angle
The FS-10 shares the practical thinking of the SG-10, but expresses it through a more angular form. Familiar J&G Coughtrie principles, with a distinctive wedge-shaped profile.
Two castings. One form.
The wedge-shaped casing is created from two separate cast aluminium parts fixed together to form the distinctive FS-10 profile. It is a construction detail that gives the light its unmistakable geometry and a satisfying sense of depth from every angle.
Wider where it matters
The corner-mounted FS-10 is well suited to side elevations, projecting corners and transitional spaces where a conventional wall light would only address one face. The three-point bracket gives the fitting a secure foothold, while the swan neck carries the wider diffuser into the space around the corner.
Neatly round the bend
The three-point corner bracket gives the FS-10 a secure, discreet foothold where two walls meet. Combined with the sweeping neck, it carries the wedge-shaped fitting clear of the architecture and lets the broad-bottomed diffuser spread light into the space below.
Finished to your fancy
The FS-10 is available in J&G Coughtrie’s five core finishes: White, Black, Industrial Aluminium, Antique Bronze and Gloss Grey. For projects calling for something more particular, it can also be specified in any custom RAL colour, priced separately. The clear glass leaves the lamp on show, pairing particularly well with an energy-efficient filament bulb for a warm, traditional glow.
Every angle covered
The FS collection takes the familiar J&G Coughtrie Swan Neck and gives it a more architectural edge. Its angular two-part cast body and widening glass diffuser are available in wall and corner-mounted variants, with clear or opal glass. Mix and match across a project to keep the character consistent while adapting the fitting to the architecture.
The devil is in the details
Angular by nature, but not by accident. The FS-10 is a collection of purposeful details: two castings working as one, a glass form that broadens the light, a screw-in diffuser that can be removed one-handed for easier servicing at height, and mounting choices designed to make installation rather less dramatic.
Width
125mm
Length
340mm
Depth
384mm
1
Two-Part Casting
Two cast aluminium sections are fixed together to create the FS-10’s distinctive wedge-shaped casing and characteristic stepped profile.
Wedge-Shaped Profile
The casing angles outwards towards the base, giving the FS-10 a more architectural silhouette than its rounded SG-10 counterpart.
Widening Screw Glass
The pressed-and-blown diffuser broadens towards the bottom to spread more light down and out. It screws directly into the casing and can be removed one-handed, particularly useful when the fitting is high up or difficult to reach.
Three-Point Corner Bracket
The cast aluminium bracket secures the FS-10 at three points, keeping the fitting composed and dependable on external corners and walkways.
Clear Screw Glass
Clear glass keeps the lamp visible and gives the angular fitting a warmer, more traditional glow, with light travelling freely through the widened diffuser.
Sweeping Swan Neck
The curved neck carries the fitting neatly away from the corner, balancing the harder wedge geometry with a softer, familiar J&G Coughtrie line.
Technical Information
If you have tech spec’s in mind, scroll through the marvellous information below, to locate all the detailed product information you might need to finalise your project details: Dimensions, weight, photometric data, materials and electrical characteristics are all included, and you are most welcome.
Product Information
Product Materials
Two-part cast aluminium casing; formed aluminium tube swan neck; cast aluminium wall mounting / corner bracket; pressed and blown screw-glass diffuser; Silicon gasket; steel fixings; porcelain lamp holder; powder-coated finish.
Product Dimensions
Overall dimensions: Width 125mm; Height 338mm; corner projection 384mm.
Product Weight
1.75kg
IP Rating
IP65: Suitable for inside or outside use in wet weather environments. Dust tight and protected against water projected from a nozzle.
Luminaire Characteristics
Bulb Type
Edison Screw (E27) / Bayonet Cap (B22)
Electrical Characteristics
Power
Depends on bulb used
Voltage
230V
Current
Depends on bulb used
80 Years of Sustainability
J&G Coughtrie has been following sustainable manufacturing and design practices for 80 years - because we believe that sustainable design is simply good design.
Peruse more products
Cast a wandering eye over our other lights. Bulkheads, Swan Necks, Pendants or Table Lamps, whatever takes your fancy...
Order
FS-10 Swan Neck Corner Light, Clear
Colour