Return to Shop

FS-10 Swan Neck Corner Light, Opal

Standard, Indoor-Outdoor

With the Opal Corner FS-10, angular fitting meets angular corner - reintroducing J&G Coughtrie's original 1960s classic. The two-part casing pairs with a wedge shaped opal glass to create a calm, even glow for circulation routes and eye-level locations.

Availability

Coming soon

Specified here with opal glass, this variant can also be paired with clear glass elsewhere in the family. It is available in five standard finishes, with any custom RAL colour available to order. The porcelain lamp holder can be supplied for Bayonet Cap or Edison Screw lamps, subject to final production specification.

Width
125mm

Length
340mm

Depth
384mm

Weight
1750g

Register Interest

A different angle

The FS-10 shares the practical thinking of the SG-10, but expresses it through a more angular form. Familiar J&G Coughtrie principles, with a distinctive wedge-shaped profile.

Wider where it matters

The corner-mounted FS-10 is well suited to side elevations, projecting corners and transitional spaces where a conventional wall light would only address one face. With opal glass, the softer output helps define routes and architectural edges without creating a harsh point source at eye level.

Two castings. One form.

The wedge-shaped casing is created from two separate cast aluminium parts fixed together to form the distinctive FS-10 profile. It is a construction detail that gives the light its unmistakable geometry and a satisfying sense of depth from every angle.

Neatly round the bend

The opal diffuser conceals the lamp and turns the widening lower section into a softly luminous volume. On a corner installation, that broader, gentler output helps define routes and nearby surfaces without creating uncomfortable glare from multiple viewing angles.

Finished to your fancy

The FS-10 is available in J&G Coughtrie’s five core finishes: White, Black, Industrial Aluminium, Antique Bronze and Gloss Grey. For projects calling for something more particular, it can also be specified in any custom RAL colour, priced separately. The opal glass gives a softer, broader glow that works particularly well on passageways, sheltered corners and eye-level installations where subtle guidance is preferable to a visible lamp.

Register Interest

Every angle covered

The FS collection takes the familiar J&G Coughtrie Swan Neck and gives it a more architectural edge. Its angular two-part cast body and widening glass diffuser are available in wall and corner-mounted variants, with clear or opal glass. Mix and match across a project to keep the character consistent while adapting the fitting to the architecture.

The devil is in the details

Angular by nature, but not by accident. The FS-10 is a collection of purposeful details: two castings working as one, a glass form that broadens the light, a screw-in diffuser that can be removed one-handed for easier servicing at height, and mounting choices designed to make installation rather less dramatic.

1

Two-Part Casting

Two cast aluminium sections are fixed together to create the FS-10’s distinctive wedge-shaped casing and characteristic stepped profile.

Wedge-Shaped Profile

The casing angles outwards towards the base, giving the FS-10 a more architectural silhouette than its rounded SG-10 counterpart.

Widening Screw Glass

The pressed-and-blown diffuser broadens towards the bottom to spread more light down and out. It screws directly into the casing and can be removed one-handed, particularly useful when the fitting is high up or difficult to reach.

Three-Point Corner Bracket

The cast aluminium bracket secures the FS-10 at three points, keeping the fitting composed and dependable on external corners and walkways.

Opal Screw Glass

Opal glass conceals the lamp and creates a soft, broad glow, particularly useful on circulation routes, corners and other locations viewed from close range.

Sweeping Swan Neck

The curved neck carries the fitting neatly away from the corner, balancing the harder wedge geometry with a softer, familiar J&G Coughtrie line.

Technical Information

If you have tech spec’s in mind, scroll through the marvellous information below, to locate all the detailed product information you might need to finalise your project details: Dimensions, weight, photometric data, materials and electrical characteristics are all included, and you are most welcome.

Product Information

Product Materials

Two-part cast aluminium casing; formed aluminium tube swan neck; cast aluminium wall mounting / corner bracket; pressed and blown screw-glass diffuser; Silicon gasket; steel fixings; porcelain lamp holder; powder-coated finish.

Product Dimensions

Overall dimensions: Width 125mm; Height 338mm; corner projection 384mm.

Product Weight

1.75kg

IP Rating

IP65: Suitable for inside or outside use in wet weather environments. Dust tight and protected against water projected from a nozzle.

Luminaire Characteristics

Bulb Type

Edison Screw (E27) / Bayonet Cap (B22)

Electrical Characteristics

Power

Depends on bulb used

Voltage

230V

Current

Depends on bulb used

80 Years of Sustainability

J&G Coughtrie has been following sustainable manufacturing and design practices for 80 years - because we believe that sustainable design is simply good design.

Built to last

Our lighting choices are tough cookies, built to last, and suitable for even the most extreme applications (or a Hollywood set, either / or).

Local suppliers

We have a long-standing policy of using suppliers and manufacturing within a 40 miles radius, because keeping it local is keeping it sustainable.

Designed to be repaired.

Our lights are designed to disassemble easily for repair or upgrade in the future as technology continues to improve.

Sustainable packaging

Each light is lovingly wrapped in recycled paper padding shipped in recycled cardboard packaging.

Low carbon materials

Where possible, we make our parts from low carbon materials that are recycled or can be recycled at end of life.

Low energy consumption

As lighting technology evolves, so do our lights. Now, we use low energy LED bulbs to minimise energy consumption.

Peruse more products

Cast a wandering eye over our other lights. Bulkheads, Swan Necks, Pendants or Table Lamps, whatever takes your fancy...

Order

FS-10 Swan Neck Corner Light, Opal

Colour

Please select a variation

Total Price

£

Please contact a member of our sales
team at sales@jgcoughtrie.com.

Register your interest

Be the first to know

Leave your email and we'll let you know as soon as the FS-10 Swan Neck Corner Light, Opal is available to order.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.